page
About Us
1800 967 573
1800 967 573
  • 3M Powered Air Purifying Respirators
Print

3M Powered Air Purifying Respirators

Providing clean breathing air is essential when working in areas where hazardous contaminants are present. These respiratory protective systems offer comfortable protection against multiple hazards and their ease-of-use enables improved productivity in the workplace.

Powered Air Purifying respirators (PAPRs); include a blower that draws contaminated air through filter/s to remove contaminants, supplying purified air to the user wearing either an open head top (loose fitting hood) or tight-fitting face  piece. Like full and half face masks, PAPRs are also available in ready-packs to simplify the respirator selection process.

3M offers a range of ready-to-go PAPR kits:
  • Full facepieces for asbestos and dust applications
  • Helmets and face shields ideal for many industrial applications, mining, construction etc.
The benefits of a PAPR are:
  • Protection factors up to 100+, based on the head top and filter/cartridge being used
  • Good option if using for long periods by reducing the weight of a filter carried on a face mask
  • Helps reduce user fatigue with air moving around the head and face cooling the wearer
  • Available with a wide range of  hoods and headtops
  • PAPR combinations that rely upon positive pressure air flow with a loose-fitting head top do not require fit testing.

These features make PAPRs ideal for industries such as; asbestos removal, pharmaceutical manufacture, smelters, waste control, land remediation, welding and agriculture. With any negative pressure or PAPR RPE the selection and use of the correct filter for the contaminant/hazard is crucial. Filters are typically designed to handle particulates, gas/vapour or a combination of both particulate and gas

The life of a gas cartridge is dependent upon the temperature, humidity, concentration and type of contaminant, the class of filter and the selected flow rate of blower. Filters should be replaced on a regular basis in accordance with an established filter replacement schedule identified in the initial risk assessment. AS/NZS 1716: 2012 recommends discarding your filter when any one of the following conditions exists:

  • The particulate filter becomes difficult to breathe through
  • Calculated breakthrough of gas occurs according to the filter replacement schedule identified during the risk assessment
  • 6 months have passed since sealed gas/vapour filter package has been opened (if expected breakthrough hasn’t occurred earlier)
  • The expiry date on the filter has passed.

In some instances, depending on the type of chemical hazard, filters must be changed out after each shift.
If filters are to be re-used they should be stored in a sealed plastic bag or box.


Filter classifications: Particulate Filters are classified as P1, P2 or P3:
  • P1 filters suitable for mechanically generated particles
  • P2 filters suitable for mechanical & thermally generated particles
  • P3 filters suitable for mechanical, thermally generated particles & highly toxic

Gas filters are rated Class 1, Class 2 or Class 3 according to their capacity to capture and hold certain gas/vapours. The classification for gas & vapour filters is based on the groups of gases they are designed to be most effective against. Filters have colour-coded labels for easy identification of the different groups.

View Versaflo kits and accessories

Shop Now

 

Visa Logo Mastercard Logo
About Bunzl Safety and Lifting

Bunzl Safety and Lifting offers an integrated approach to the selection, supply, service, and replacement of safety products, resulting in our ability to manage the complete life cycle of your personal and workplace safety requirements. Bunzl Safety and Lifting is a leading manufacturer of safety products, we provide the very best in workwear, corporate wear, PPE, footwear, materials handling, load restraint, and recovery,height safety, and site safety. We are also a leading supplier of some of the best industrial safety brands on the market, including Mack, Ninja, Contego, Boomerang, Beaver, B-Safe, WS Workwear, Frontier, Black Rat, Robertsons, 3M, Honeywell, Ansell, Bolle Safety, DuPont, Donaghys, MSA, Moldex, Steel Blue, Oliver, uvex, Sqwincher, MaxiFlex, DNC Workwear, Mayo Hardware, Gunnebo Industries, Skylotech and Blundstone. We also offer a range of services including product specialisation and consolidation, custom embroidery and branding, lifting equipment and inspections, NATA Accredited testing and services, height safety installed systems and training, managed inventory, eCommerce and digital solutions, clothing fitouts and yearly uniform issues, ethical sourcing, Indigenous Engagement, and environmental responsibility. We have an Australia-wide network of branches that ensures fast shipping across the country.

Bunzl Brands & Operations Pty Ltd (BBO) located at 55 Sarah Andrews Close Erskine Park NSW 2579 quality scope covers: manufacturing, importing, wholesaling, repairing and testing of lifting, rigging equipment, winches, hoists and materials handling products. The manufacture of synthetic slings and webbing products including load restraint and height safety equipment. Manufacture, import, wholesale and distribution of PPE products, workwear and hand tools. Design and development of products and services and the provision of mechanical testing services.